Logo Call Today
Datasheets

Datasheets

General Requirements

Introduction

The Flexiloo® luxury toilet system is designed to fold for transportation and is fully portable and easily moved and installed by one person using the Flexiloo® trolley. It is intended to be installed in covered areas and is not suitable for use outside without suitable protection from weather, e.g. building, marquee or temporary structure.

There are modules to provide cubicles (Patented: GB2432853), urinals, vanity units and accessible cubicles available. As each module width is based on multiples of 0.9m it is possible to install the modules in any order to provide flexible arrangements for any number of guests or configuration.

The system is primarily designed for use with vacuum drainage with low water usage and no need for chemicals but can be manufactured with a conventional gravity system if required.

System Requirements

SITING - A firm level base protected from weather.

POWER - A basic 3+1 setup will need 1x13amp single phase supply (240v) for the pump assembly (1.5kw) and 1x13amp single phase supply (240v) for water heating and lighting (3kw). Larger installations will require additional supplies depending on total equipment provided.

WATER - One supply normally required @ minimum 2 bar (max. 5 bar), but can be supplied using tanks and booster pump if necessary. 


Datasheets

Toilet Cubicle (Patented: GB2432853) Folded Assembled
Width 0.9 0.9
Depth 0.69 1.8m 
Height 2.26 2.2m 
Weight   190 kg (approx. depending on model)
Standard toilet fitted   Jets 59M FD/VPC-V
Water consumption (per flush)   0.8 litres (adjustable)
Lighting   1x13w fluorescent
Power connection   1 x system connection in
1 x system connection out

Urinal Unit Folded Assembled
Width  0.655m 1.8m
Depth 0.925 0.9m
Height 2.24 2.2m
Weight   170 kg (approx. depending on model)
No. of urinals   3
Lighting   3 x 13w fluorescent
Power connection   1 x system connection in
1 x system connection out

Vanity Unit  
Width 0.9m
Depth 0.6m
Height 2.2m
Weight 70kg slave & 85kg master (approx. depending on model)
MASTER UNIT ONLY Automatic infra red tap (depending on model)
2.2kw 240v water heater
240v distribution board with RCD and circuit breakers
Lighting 2 x 240v 50w halogen
Power connection 1 no 16amp 240v-in
4x system connections-out
SATELLITE UNITS Automatic infra red tap (depending on model)
Lighting 2 x 240v 50w halogen
Power connection 1 x system connection in
1 x system connection out

Nb A maximum of 3 satellite units per master unit.
At least one master unit needed for each installation.


Vacuum system  
15MB Pump system (multiples of) Capacity 15m3/hr
  Flushing capacity 150 flushes/hr
Power cons. (nom) 1.5KW 230v 60 Hz
Current 6.1A
Weight 120kgs (approx)
Power connection 1x 16a 240v Single phase
Grey water tanks - basins and urinals discharge to tank by gravity and interfaced with vacuum system by ED valve which is activated by water level

Due to constant efforts to improve our products we reserve the right to change specifications without notice
July 2011


Flexiloo® LLP 10 Parker's Close, Downton Business Centre, Downton, Wilts SP5 3RB

© Flexiloo® 2017Terms & conditionsDesigned by enotions Ltd